Seemon2: 出力ファイル等のフォーマット
seemon2の出力ファイル(v0.5.12)
- 日付と時刻
- 最後の測定時の星(1)重心x座標
- 最後の測定時の星(1)重心y座標
- 最後の測定時の星(2)重心x座標
- 最後の測定時の星(2)重心y座標
- 最後の測定時の重心のずれ(x)
- 最後の測定時の重心のずれ(y)
- r0 (transverse)
- r0 (longitudinal)
- uncorrected FWHM (transverse)
- uncorrected FWHM (longitudinal)
- FWHM corrected for altitude (transverse)
- FWHM corrected for altitude (longitudinal)
- Number of data points after noise clipping / Number of data points
- Telescope R.A. (deg)
- Telescope Decl. (deg)
- hour angle
- altitude
- 最後の測定時の星(1) peak count
- 最後の測定時の星(2) peak count
- 最後の測定時の星(1) star flux
- 最後の測定時の星(2) star flux
- IICCD shutter開時間 (microsec)
finderの出力ファイル(POSFILE, v0.6.9)
- 星のpeak x座標
- 星のpeak y座標
- 星のpeak count
- 雨フラグ (1:雨 0:雨でない)
- 湿度
- ドーム状態(1:閉 2:不明 3:開)
finder / finder_commの出力ファイル(DOMESTATFILE, v0.6.9)
- ドーム状態(1:閉 2:不明 3:開)
seemon2 configuration file (v0.6.6)
PREFPATH = /usr/local/share/seemon2/seemon2.conf
- DIMM ID (1 or 2)
- socket server (e.g., dimm2)
- IICCD default shutter speed (int, 1000-9999)
- guide acceleration for high alt (int)
- lower limit of guide acceleration (int)
- end time for auto mode (double, JST)
- lower limit of altitude in star selection
- lower limit of altitude for tracking
back to manual top
back to index
iwata {at} oao.nao.ac.jp